Hardware monitoring - Revision history

Insomnia at 18:58, 17 May 2008

2008-05-17T18:58:06Z

← Older revision		Revision as of 18:58, 17 May 2008
Line 1:		Line 1:
	~~== '''~~LM ~~sensors''' ==~~		* [[LM Sensors]]
			* [[Smart Daemon]]

	~~turn on i2c support in your kernel~~

	~~-device drivers\i2c support~~

	~~And turn on the appropiate device drivers in the kernel~~

	~~-device drivers\hardware monitoring\ ite87 -Asus asb100 - amd athlon temp~~

	~~install the package lm-sensors~~

	~~Apt-get install lm-sensors~~

	~~># sensors-detect -> wil give you a view of the found sensors (say YES to all questions)~~

	~~Driver `eeprom' (should be inserted):~~
	~~Detects correctly:~~
	* Bus `SMBus PIIX4 adapter at 0b00'
	~~Busdriver `i2c-piix4', I2C address 0x50~~
	~~Chip `eeprom' (confidence: 6)~~
	* Bus `SMBus PIIX4 adapter at 0b00'
	~~Busdriver `i2c-piix4', I2C address 0x51~~
	~~Chip `eeprom' (confidence: 6)~~
	~~EEPROMs are NOT sensors! They are data storage chips commonly~~
	~~found on memory modules (SPD), in monitors (EDID), or in some~~
	~~laptops, for example.~~
	~~Driver `k8temp' (should be inserted):~~
	~~Detects correctly:~~
	* ISA bus, undetermined address (Busdriver `i2c-isa')
	~~Chip `AMD K8 thermal sensors' (confidence: 9)~~
	~~Driver `it87' (should be inserted):~~
	~~Detects correctly:~~
	* ~~ISA bus address 0x0228 (Busdriver `i2c-isa')~~
	~~Chip `ITE IT8716F Super IO Sensors' (confidence: 9)~~

	~~The script will give you the appropiate line to insert in /etc/modules~~
	~~Make shure that the modules are configured in your kernel~~


	~~#----cut here----~~
	~~# I2C adapter drivers~~
	~~i2c-piix4~~
	~~# Chip drivers~~
	~~# Warning: the required module eeprom is not currently installed~~
	~~# on your system. For status of 2.6 kernel ports check~~
	~~# http://www.lm-sensors.org/wiki/Devices. If driver is built~~
	~~# into the kernel, or unavailable, comment out the following line.~~
	~~eeprom~~
	~~# Warning: the required module k8temp is not currently installed~~
	~~# on your system. For status of 2.6 kernel ports check~~
	~~# http://www.lm-sensors.org/wiki/Devices. If driver is built~~
	~~# into the kernel, or unavailable, comment out the following line.~~
	~~k8temp~~
	~~# Warning: the required module it87 is not currently installed~~
	~~# on your system. For status of 2.6 kernel ports check~~
	~~# http://www.lm-sensors.org/wiki/Devices. If driver is built~~
	~~# into the kernel, or unavailable, comment out the following line.~~
	~~it87~~
	~~#----cut here----~~


	~~># sensors will give you the readout of the sensors~~

	~~it8716-isa-0228~~
	~~Adapter: ISA adapter~~
	~~VCore: +1.01 V (min = +0.00 V, max = +4.08 V)~~
	~~VDDR: +3.38 V (min = +3.57 V, max = +4.08 V) ALARM~~
	~~+3.3V: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM~~
	~~+5V: +4.89 V (min = +0.00 V, max = +6.80 V)~~
	~~+12V: +11.97 V (min = +0.00 V, max = +16.32 V)~~
	~~in5: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM~~
	~~in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM~~
	~~5VSB: +4.89 V (min = +0.00 V, max = +6.85 V)~~
	~~VBat: +3.22 V~~
	~~fan1: 1588 RPM (min = 3245 RPM)~~
	~~fan2: 0 RPM (min = 3245 RPM)~~
	~~temp1: +27Â°C (low = -1Â°C, high = +127Â°C) sensor = diode~~
	~~temp2: +32Â°C (low = -17Â°C, high = +127Â°C) sensor = thermistor~~
	~~temp3: +25Â°C (low = -1Â°C, high = +127Â°C) sensor = thermistor~~
	~~vid: +1.550 V~~
	~~k8temp-pci-00c3~~
	~~Adapter: PCI adapter~~
	~~Core0 Temp: +7Â°C~~
	~~Core0 Temp: -1Â°C~~
	~~Core1 Temp: +8Â°C~~
	~~Core1 Temp: +9Â°C~~

	~~The read out of the CPU temp is still an issue. As you can see it gives the wrong values~~

Insomnia: /* '''LM sensors''' */

2008-05-12T14:03:51Z

'''LM sensors'''

← Older revision		Revision as of 14:03, 12 May 2008
Line 5:		Line 5:

	-device drivers\i2c support		-device drivers\i2c support

			And turn on the appropiate device drivers in the kernel

	-device drivers\hardware monitoring\ ite87 -Asus asb100 - amd athlon temp		-device drivers\hardware monitoring\ ite87 -Asus asb100 - amd athlon temp

Insomnia: /* '''LM sensors''' */

2008-05-12T14:02:32Z

'''LM sensors'''

← Older revision		Revision as of 14:02, 12 May 2008
Line 4:		Line 4:
	turn on i2c support in your kernel		turn on i2c support in your kernel

	-device drivers\i2c support		-device drivers\i2c support
	-device drivers\hardware monitoring\ ite87 -Asus asb100 - amd athlon temp		-device drivers\hardware monitoring\ ite87 -Asus asb100 - amd athlon temp

	install the package		install the package lm-sensors
	- lm-sensors

			Apt-get install lm-sensors

	># sensors-detect -> wil give you a view of the found sensors (say YES to all questions)		># sensors-detect -> wil give you a view of the found sensors (say YES to all questions)

Insomnia: /* '''LM sensors''' */

2008-05-12T14:00:23Z

'''LM sensors'''

← Older revision		Revision as of 14:00, 12 May 2008
Line 12:		Line 12:

	># sensors-detect -> wil give you a view of the found sensors (say YES to all questions)		># sensors-detect -> wil give you a view of the found sensors (say YES to all questions)

			Driver `eeprom' (should be inserted):
			Detects correctly:
			* Bus `SMBus PIIX4 adapter at 0b00'
			Busdriver `i2c-piix4', I2C address 0x50
			Chip `eeprom' (confidence: 6)
			* Bus `SMBus PIIX4 adapter at 0b00'
			Busdriver `i2c-piix4', I2C address 0x51
			Chip `eeprom' (confidence: 6)
			EEPROMs are NOT sensors! They are data storage chips commonly
			found on memory modules (SPD), in monitors (EDID), or in some
			laptops, for example.
			Driver `k8temp' (should be inserted):
			Detects correctly:
			* ISA bus, undetermined address (Busdriver `i2c-isa')
			Chip `AMD K8 thermal sensors' (confidence: 9)
			Driver `it87' (should be inserted):
			Detects correctly:
			* ISA bus address 0x0228 (Busdriver `i2c-isa')
			Chip `ITE IT8716F Super IO Sensors' (confidence: 9)

			The script will give you the appropiate line to insert in /etc/modules
			Make shure that the modules are configured in your kernel


			#----cut here----
			# I2C adapter drivers
			i2c-piix4
			# Chip drivers
			# Warning: the required module eeprom is not currently installed
			# on your system. For status of 2.6 kernel ports check
			# http://www.lm-sensors.org/wiki/Devices. If driver is built
			# into the kernel, or unavailable, comment out the following line.
			eeprom
			# Warning: the required module k8temp is not currently installed
			# on your system. For status of 2.6 kernel ports check
			# http://www.lm-sensors.org/wiki/Devices. If driver is built
			# into the kernel, or unavailable, comment out the following line.
			k8temp
			# Warning: the required module it87 is not currently installed
			# on your system. For status of 2.6 kernel ports check
			# http://www.lm-sensors.org/wiki/Devices. If driver is built
			# into the kernel, or unavailable, comment out the following line.
			it87
			#----cut here----


	># sensors will give you the readout of the sensors		># sensors will give you the readout of the sensors

			it8716-isa-0228
			Adapter: ISA adapter
			VCore: +1.01 V (min = +0.00 V, max = +4.08 V)
			VDDR: +3.38 V (min = +3.57 V, max = +4.08 V) ALARM
			+3.3V: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
			+5V: +4.89 V (min = +0.00 V, max = +6.80 V)
			+12V: +11.97 V (min = +0.00 V, max = +16.32 V)
			in5: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
			in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
			5VSB: +4.89 V (min = +0.00 V, max = +6.85 V)
			VBat: +3.22 V
			fan1: 1588 RPM (min = 3245 RPM)
			fan2: 0 RPM (min = 3245 RPM)
			temp1: +27Â°C (low = -1Â°C, high = +127Â°C) sensor = diode
			temp2: +32Â°C (low = -17Â°C, high = +127Â°C) sensor = thermistor
			temp3: +25Â°C (low = -1Â°C, high = +127Â°C) sensor = thermistor
			vid: +1.550 V
			k8temp-pci-00c3
			Adapter: PCI adapter
			Core0 Temp: +7Â°C
			Core0 Temp: -1Â°C
			Core1 Temp: +8Â°C
			Core1 Temp: +9Â°C

			The read out of the CPU temp is still an issue. As you can see it gives the wrong values

Insomnia at 13:50, 20 April 2008

2008-04-20T13:50:38Z

← Older revision		Revision as of 13:50, 20 April 2008
Line 11:		Line 11:


	# sensors-detect -> wil give you a view of the found sensors		># sensors-detect -> wil give you a view of the found sensors (say YES to all questions)

	# sensors will give you the readout of the sensors		># sensors will give you the readout of the sensors

Insomnia at 13:49, 20 April 2008

2008-04-20T13:49:27Z

← Older revision		Revision as of 13:49, 20 April 2008
Line 12:		Line 12:

	# sensors-detect -> wil give you a view of the found sensors		# sensors-detect -> wil give you a view of the found sensors

			# sensors will give you the readout of the sensors

Insomnia at 13:48, 20 April 2008

2008-04-20T13:48:27Z

New page

== '''LM sensors''' ==

turn on i2c support in your kernel

-device drivers\i2c support
-device drivers\hardware monitoring\ ite87 -Asus asb100 - amd athlon temp

install the package
- lm-sensors

# sensors-detect -> wil give you a view of the found sensors